Matsushima Measure Tech Co., Ltd. > PRODUCTS INFORMATION > BELT CONVEYOR PROTECTION > CHUTE SWITCH
CHUTE SWITCH
CHUTE SWITCH
For Plugged Chute Lateral Pressure Detection
Detecting method type
Sensitivity
: 14.7 to 24.5N (1.5kg to 2.5kg)
: (At swing plate tip)
Chute Switch is used in order to stop a belt conveyor instantly when a transported load clogs a junction chute of the conveyor. This switch is so constructed that it should be mounted on the side wall of junction chute by use of a square hole cut out in the wall. When the load clogs the junction chute and then the swing plate of the Chute Switch is pushed back with the pressure of accumulated load, the Chute Switch sends out an emergency stopping signal.
Please wait for the input format, which is displaying shortly.
If it does not show up for a whle, please get contact with here.