POINT LEVEL DETECTION

Matsushima Measure Tech Co., Ltd. >  PRODUCTS INFORMATION > POINT LEVEL DETECTION >  VIBRATING LEVEL SWITCH

VIBRATING LEVEL SWITCH


VIBRATING LEVEL SWITCH

Level Detection for Fine Powder Material
Vibrating Level Switch MVL Series
Product type: Probe (standard), Cable hanging, Pipe
Power Supply: AC/DC22 – 264V 50/60Hz
Power consumption: 4.7W (AC), 1.8W (DC)
Mounting: R1 thread
L-length:
  Probe (standard) 225mm
  Cable hanging   600mm – 20000mm
  Pipe       350mm – 2000mm

Bulk density: ≥ 0.02g/cm3
Output signal: 1C contact output

Vibrating level switch vibrates the probe with a certain frequency by the piezoelectric element, and monitors as constant amplitude voltage with electronic circuit. The amplitude voltage is substantially reduced as the probe is constrained by powder and granular materials. This switch detects this variation in the amplitude voltage and outputs the contact signal. It can be widely applied from fine powder to granular materials including grain as a storage level switch.



Catalog PDF





≪  Vibrating Level Switch PR MOVIE ≫



 
≪ Matsushima Lab. Vol.3 New Release Vibrating Level Switch  ≫



 

 

Please wait for the input format, which is displaying shortly.

If it does not show up for a whle, please get contact with here.