CONTINUOUS LEVEL MEASUREMENT

Matsushima Measure Tech Co., Ltd. >  PRODUCTS INFORMATION > CONTINUOUS LEVEL MEASUREMENT >  FMCW RADAR

FMCW RADAR


MICROWAVE LEVEL METER

Level Measurement of Molten metal,
Molten steel and Raw Materials in Blast Furnace
Measuring range 2.0 to 15 m & 2.5 to 30m
Accuracy ±0.2% F.S.or below

Microwave Level Meter, with its particular feature that is hardly influenced by the measuring conditions, can be utilized for level measurement under the severe environment where high density dust exists at high temperature and high pressure. It is utilized for level measurement of raw materials of blast furnace, molten metal, molten steel, slag and raw materials of CDQ.


ファイルを開く

Catalog PDF

OPTIONS


ファイルを開く

Antenna Protection Parts


ファイルを開く

Spare Parts List


MICROWAVE LEVEL METER

Measuring range 1~10M
Accuracy FS±0.2% max.

The measurement of the coal charged into Coke Oven with FMCW Microwave
Level Meter can figure out the production amount of coke.
The movable antenna type is optionally available to meet with the facility.


ファイルを開く

Catalog PDF



MICROWAVE PROFILEMETER

Monitoring of Burden Profile in Blast Furnace
Measuring range 1.5 to 10m
Accuracy ±50mm(Subject:Metal face)

Microwave Profilemeter is a non-contact type level meter so designed that the raw materials level in the blast furnace is continuously measured by inserting a lance equipped with a microwave sensor into the furnace center.
The Profilemeter feeds the lance position data and level measurement data into a process-computer,and displays the configuration of raw material deposit in blast furnace on a CRT display.
The data of Profilemeter are useful for reduction of the fuel cost in blast furnace and establishment of the new and effective operation technique.

Spare Parts


ファイルを開く

1.Microwave Circuit box


ファイルを開く

1-A.Mixing Amplifier Circuit Board


ファイルを開く

1-B.Modulator Driver Circuit Board


ファイルを開く

2.Control Panel


ファイルを開く

3.Signal Processing Panel